XP95 VID Base (Red Flash) – Isolating

45681-333APO

The Visual Indicator Base is a loop-powered visual indicator combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The visual indicator base can be used with either a detector fitted or with a cap as a stand-alone alarm device.

Visual indicator flash rate of once per second
Synchronisation of visual indicator flash
Individual and group addressing
Unique visual indicator self-test
Loop-powered
Built-in Isolator

Technical specification

General	Warranty 10 year
Performance	Flash rate 1Hz
Mechanical	Colour White Materials housing Polycarbonate Product depth 31mm Product diameter 115mm Weight 109g Product depth 1.22in Product diameter 4.53in
Conformance	Standards EN 54-17 Approvals CPR
Electrical	Polarity L1 & L2 are polarity sensitive Protocol voltage 5 to 9V peak to peak Protocol voltage (max) 9V Protocol voltage (min) 5V Power-up surge current 1.2mA Maximum power-up time <1 second Quiescent current 300μA Quiescent current tested at 24V dc Supply voltage (min) 17V dc Supply voltage (max) 28V dc Supply voltage (Vmin-Vmax) 17 to 28V dc
Environmental	Humidity (max) 95% RH Humidity (min) 0% RH Humidity 0% to 95% (no condensation or icing) Humidity Note no condensation or icing Operating temperature (max) 60°C Operating temperature (min) -20°C Operating temperature -20 to 60°C IP rating Value IP21D Operating temperature -4 to 140°F Operating temperature (max) 140°F Operating temperature (min) -4°F